Does implant tooth removal hurt

• Make an appointment
• Consulting price
• Online consultation

The extraction of dental implant model is a key step in the process of dental implant. Inadequate dental molds may lead to implant failure. But does it hurt to take out the implant? It is suggested that the old iron workers who plan to implant teeth should understand the standard process of implant tooth mold taking and find out the answer.

First of all, ask the dental friends who have done implant repair, does it hurt to take out the implant?

Implant teeth generally do not hurt when taking the mold.

Generally speaking, the implant doctor will anaesthetize the local teeth before the operation, so that the customer will not feel pain during the process of taking the implant. However, some people may have little reaction to anesthesia and have a little pain, but it is completely within the acceptable range. So don't worry too much about your dental friends.

It is recommended to understand the standard process of dental implant mold taking

Generally, the mold taking of implant teeth can be divided into Conventional mold taking and Implant transfer formwork Two ways.

Conventional mold taking:

Conventional mold taking is to take the mold directly (236) after the implant dentist fixes the finished abutment in the mouth. However, technicians can only make restoration z.c on the gypsum platform. So I don't use it anymore. （om）。

Implant transfer formwork:

However, implant transfer modes are divided into Window opening and mold taking and Close the window and take out the mold 。

1. Window opening and mold taking - use the window opening tray with fixing screws and transfer body mold, with high precision.

Standard process of windowing implant tooth mold:

(1) First, fix the transfer rod on the implant (), try on the individual tray (net) for window opening, and ensure that the fixing screw can go through the window opening;

(2) Then put the tray with silicone rubber impression into the mouth. After the impression solidifies for about 4-5 minutes, loosen the fixing screw from the opening and move it out of the mouth;

(3) The transfer body is taken out of the mouth together with the fixed screw, and then the substitute is installed in the impression, and then fixed on the transfer rod with the fixed screw to make the false gum, and then injected into the plaster model.

2. Closed window mold taking - the mold taking operation steps are simple, but the precision is low, which is not commonly used at present.

After seeing the standard procedure of dental implant removal, do you think it will not hurt? Of course, ordinary doctors can anaesthetize, so those who want to implant teeth need not worry.