1. Aili Gang
  2. Plastic information
  3. How big the cup can be for breast augmentation with a 295cc drop shaped flat breast prosthesis

How big the cup can be for breast augmentation with a 295cc drop shaped flat breast prosthesis

Many flat breasted sisters have made a full strategy before breast augmentation, but they still don't know how to make the cup of 295cc Manto water drop breast augmentation. Today, the pictures of 295cc Manto prosthesis breast augmentation effect are a feast to witness whether the chest can reach cup C.

Ringing bell~Here comes the dry goods ↓↓

Look at people with different breast bases. Finish the breast augmentation effect picture of Manto 295cc water drop prosthesis:

Online friend Xiao Lizi:

[Chest base: flat chest, visual inspection of cup A

 How big the cup can be for breast augmentation with a 295cc drop shaped flat breast prosthesis

With a height of 162 and a weight of 100 kg, she has made a chest chassis of 16, an upper circumference of 73, a lower circumference of 70, and a Manto 295cc drop shape. Now she has recovered for a year, and her breast effect is very stable, with an upper circumference of 85 and a lower circumference of 70. I think it's very good. After the test, it becomes a C cup. It is not fat to wear clothes, nor small to take off clothes. Sisters can refer to it.

Netizen Nie Xiaoqian:

[Chest base: poor, only one cup. I want to make a bigger chest

 How big the cup can be for breast augmentation with a 295cc drop shaped flat breast prosthesis

Chassis 13, the breast is relatively tight, according to my needs, the doctor suggested 295cc bulge, which has been done for 6 months now, a little smaller than the D cup. I don't think I'm fat. This is the right size.

Mo Xiaoxi, a netizen:

[Chest condition before operation: zero base of chest, looking at Ma Pingchuan from the front]

 How big the cup can be for breast augmentation with a 295cc drop shaped flat breast prosthesis

I originally A, according to the suggestions of my chassis doctor's chassis doctor, about 275-295cc10, adjust cc according to different sizes of models. When I was worried about being light, I was worried that I would regret it, so I made 295 drops of water directly because I was too thin. My chest looks like a D cup. Because I chose low convex, the shape and size are naturally bad.

Netizen Little Sweet

[Chest base: B cup with a little sagging chest

 How big the cup can be for breast augmentation with a 295cc drop shaped flat breast prosthesis

Height: 170 kg, weight: 148 kg. Before doing this, it was 295cc or 330cc, and the chest was slightly enlarged and sagging. After face to face diagnosis and measurement by doctors, 295 water drops were directly made. After completion, wear 80 pieces of D underwear, which is visually C but not exaggerated, The chest shape has also changed.

How many cups are the water drop prostheses after the 295cc Manto breast augmentation? Worried about regret becoming small, afraid of being too fake to become big

From these Netizens have finished drying the effect picture of 295cc water drop prosthesis breast augmentation It can be seen that:

The size of the chest is different, some are C cups, some are D cups. It depends on each person's chest base, height ratio and the type of prosthesis selected; 295CC Not everyone can grow C cup.

 How big the cup can be for breast augmentation with a 295cc drop shaped flat breast prosthesis

Manto breast augmentation models range from 2000cc to 650cc, which can meet the needs of different people. They can be divided into plaque version, noble version, exquisite version, charm version, and different convexities, including low convexity, middle convexity, and high convexity. Different choices have different effects.

Refer to the figure above. If the chest base is poor, the chassis is about 13-16, and the height is between 160-165, it is more likely that the size of 295cc is larger than D cup. If the height is between 170-175, it is C cup.

 How big the cup can be for breast augmentation with a 295cc drop shaped flat breast prosthesis

In addition, I want to tell you that the design of the water drop prosthesis is flat and concave, close to our chest shape, and the effect will be more natural. The appearance of the round prosthesis is high in the middle, a bit like an inverted bowl, not suitable for too thin girls. If you are very concerned about the shape of the chest, it is recommended to choose the shape of water droplets.

Site reminders and announcements
This website provides information storage space services for registered users. The articles/texts uploaded by non "Ailibang" editors are all self published and uploaded by registered users, which does not represent our opinion. The copyright belongs to the original author. If there is infringement, false information, wrong information or any problem, please contact us in time, and we will delete or correct it at the first time.

Related articles